Tackifying Resistant

Slidebelt conveyor belts with rubber cover on one side (upper or lower side of the belt is not covered).

Operational area

  • conveying of sticky material


  • from 200/2 – 500/3

Thickness up to 5 mm with cutted edges, above 5 mm with the covered edges.

Use of cover grades in relation to the kind of transported material:
AA (W) - conveying of very abrasive, granular and loose materials
B (Y) - conveying of slightly abrasive, angular and small lump-sized materials
GMOR - volume of the rubber covers cannot extent its volume for more than extra 70% when oiled by ASTM 3 during 72 hours period and 70 Celsius surrounding temperature